Pertex — Application decision branches

Application decision branches: choose the layer job first, then the family name, then the evidence that would make the next sample useful.

Ask a material question

Application decision branches

  1. What is the use environment?

    Pertex work on this site sits in outdoor performance fabrics. The first branch is the environment the layer will meet, not a catalogue of finished jackets. A lightweight shell may live in a pack for most of a day and only face wind and light precipitation. A weather layer may be the cloth that stays outside, so liquid water and vapour movement both matter and must be specified apart. An industrial processing context, if it appears, is limited here to how the textile will be cut and joined, not to a claim that the cloth is a protective workwear system.

    • Lightweight shell: pack volume, face hand, and the seam the pattern needs.
    • Weather layer: which wetness the spec is actually about, written as separate behaviours.
    • Assembly context: usable width, edge behaviour and the joining method the factory will use.
  2. Which decision matters first?

    Buyers often arrive with a family word and a feeling that the current cloth is “too much” or “not enough.” Split that feeling. If the issue is handle, noise or how the face looks after flex, the first decision is appearance and hand, reviewed on a physical specimen against a dated reference. If the issue is staying dry or dumping vapour, the first decision is functional behaviour, and it needs a method rather than a slogan. Quantum and Shield should not be asked to answer both decisions in one sentence. Quantum Air, when named, gets its own line so a lighter construction is not silently treated as the same build.

    Handling and appearance

    Use a physical sample and an agreed reference. Record drape, surface sheen and any face texture you need to keep. A screen image can set colour direction; it cannot settle hand. Shade notes stay with that same specimen so a later lot is compared with the right card.

    Functional behaviour

    Identify the requirement and the test context. Water resistance is not vapour transmission. If a membrane or a coating is part of the proposed build, say which layer is under review and which specimen state the report used. Do not infer either layer from the words “outdoor” or “shield” alone.

  3. What should the inquiry include?

    Composition, construction, quantity and destination are the minimum that lets a shortlist form. Add GSM only as a target with a tolerance, and add usable width only with its unit. Finish belongs in the note when you know it, and as a question when you do not. If you are comparing pertex shield waterproof breathable fabric with another family, paste the phrase you are using and then unpack it: which water behaviour, which vapour behaviour, which specimen. Quantity and destination describe the commercial frame. They are not a promise of availability, a minimum order or a ship date.

    Close the branch by naming the decision the next reply should unlock. That might be “which family is closer in hand,” “which report covers liquid water,” or “what width can be cut.” A branch left as “send something outdoor” cannot be reviewed. The development path for face, functional layer and backing is continued on the material innovation page, where those interfaces stay in one table.

    Four selection trade-offs stay open until the brief names a side. Natural fibres are discussed for hand, moisture uptake and care. Synthetic filaments are discussed for strength, drying and functional processing. The environmental conclusion needs a scoped assessment, and none is published here. A coated substrate is reviewed for coating add-on, adhesion and flexibility. A laminated construction is reviewed for membrane structure, bond and specimen state. If the record names neither, both cells stay questions. Stock selection needs the inventory date, the shade batch and whether a repeat is the same batch. Custom development needs the sample, the test method and the bulk approval point. Quantity does not prove either path. Abrasion resistance, tear strength and tensile strength are read only with the method and the end point. Hand, pilling and face appearance are read on the specimen. One of those answers does not replace the other.

    Write the specification fields in their own units, still as buyer targets rather than as Pertex results. Composition is percent by mass, and the shares in one declaration are checked so they sum to 100. Mass per unit area is g/m². Usable width is cm, kept apart from the selvedge. Yarn linear density is denier or dtex, not a spun count written in the same cell. Roll length is metres only when the format is a roll. Colorfastness, dimensional stability, air permeability, seam slippage and a lab dip each need their own method row. A lab dip does not establish batch traceability for a later roll. Hydrostatic head and water vapour transmission stay in separate rows, each with specimen condition. No numeric Pertex result is supplied for any of those rows.

Match the use before the material label

An application page is a way to frame the environment, the stress and the assembly question. It is not a list of completed installations. Describe contact, exposure, care and processing separately, then ask which evidence belongs to that condition.

Use conditions to separate in the brief
ConditionQuestionEvidence context
Daily contactWhat touch, care and surface change matter?Physical sample and the stated care context
MoistureIs the question liquid resistance or vapour movement?Method and specimen conditioning
AssemblyHow will the textile be cut or joined?Construction and usable width
ColourWhich physical reference is under review?Shade approval notes, not a screen swatch

Describe the use environment

Exposure, care and processing make the brief specific when they are written as separate notes.

Discuss your fabric requirements